Description

Description – Dynamic Garment Cabinet (MOC SS 304, 316,316L )

HEPA FILTER	Imported Minipleat Hepa Filter with Hot Melt Technology, Which Conforms to Eu-14 Grade at Supply Position with an Efficiency Rating Better than 99.17% for 0.3 Micron
Pre-filter	Pre-filters are made from Non-woven synthetic with HDPE mesh; conforms to EU-06 Grade, with an efficiency rating better than 95% down to 5 micron
Fresh Air Filter	Fresh Air filters are made from Non-Woven Synthetic with HOPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10 micron
Motor blower assembly	Motor blower designed of statically” and dynamically balanced for supply of sufficient capacity and static pressure to take care of air flow requirement for entire life of HEPA Filter
Pressure Gauge	Magnehelic Gauge (0-25 mm:1 Nos.)to monitor pressure drop across HEPA Filter
Door	SS 304 doors with double walled flush Toughened glass view panels with SS handles.
Interlocking	Electro-Magnetic interlocking arrangement to put-off UV Light if either side door opens and LED Light on.
Shelves	SS 304 hanging arrangement (or removable type shelves
Temperature Control	Heater with thermostat for control of temperature in cabinet
On/Off Switches	Keypad ON/OFF Switches for motor & UV Light & Led Light
Switch socket	6/15 Amp Single phase switch socket use for external equipment
DOP Port	DOP test port at up stream of HEPA filter Integrity test. (With PAO Solution)
Vibration Level	Minimum
Electric Supply	230V AC 1-Ø 50 HZ/415V AC 3-Ø 50 HZ
Noise Level	Less than 75 dB on Scale ‘A’ when Ambient is not greater than 60 dB on Scale ‘A’

 

OPTIONAL ACCESSORIES

1) UV. Light with Hour Meter

2) Electro Magnetic / Mechanical Interlocking

3) Audio Visual Alarm indicating condition of HEPA filters.

4) Clean down timer with operation hold indicator

5) VFD based control systems.

6) Photohelic guage/ Digital pressure gauge to monitor of pressure drop across filter.

7) Sodium vapor lamps

8) Flame proof fitting

SERVICE

1. Installation-: furniture & equipment installation Provided by our company , our site engineer installed all
the machines and furniture as per requirements.
2. Validation-: validation also provide by our company repetative team done. Customer site location or before
Dispatch the machine at our factory location validation Done . Depends on client requirements.
3. Transport-: as per client requirement transportation Arrange by our team also courier the material through by Road or by air.
4. Site engineer-: in case any issue come to the machine our Engineer will be visit in next day in customer site(depends On customer location).

APPLICATION

1. Pharmaceuticals & bio technologies clean room	6. Hospital
2. Chemical industry	7. Radiological contamination
3. Food industry	8. Medical device clean room
4.Chemical lab	9. Microelectronics nanotechnology
5. Institute	10 .Life sciences

SERVICE AREA

LOCATION:

VASAI	VAPI	DAMAN	HARIYANA	GOA
ANDHERI	BARAMATI	AHMEDABAD	HARIDWAR	RAJASTHAN
THANE	NASHIK	KOLKATA	SIDDCUL	UDYAPUR
TALOJA	DAHEJ	CHENNAI	SIKKIM	HYDERABAD
PALGHAR	SURAT	BENGALURU	INDORE	TURBHE
BOISAR	VADODARA	BADDI	UTTAR PRADESH	HINJWADI